User guide

BIG FIX INSTALLATION INSTRUCTIONS

1. Remove stock cage and stock bearings. With grease, coat bearing surfaces of clutch hub and clutch basket.

Place basket over hub and place 3 bearings

at the 6 o’clock position, place 1 bearing each at 3, 9 &12 o’clock position, this will center the clutch basket.

Insert the balance of the bearings from 6 o’clock clockwise and counter clockwise up to 12 o’clock.

There should be a slight space between the

bearings when installed; this is normal.

2. Place nylon shield over bearings.

PAGE 1
BIG FIX INSTALLATION INSTRUCTIONS 1. Remove stock cage and stock bearings. With grease, coat bearing surfaces of clutch hub and clutch basket. Place basket over hub and place 3 bearings at the 6 o’clock position, place 1 bearing each at 3, 9 &12 o’clock position, this will center the clutch basket. Insert the balance of the bearings from 6 o’clock clockwise and counter clockwise up to 12 o’clock. There should be a slight space between the bearings when installed; this is normal. 2.
PAGE 2
3. Place the stock cage retainer (with lip facing out) over nylon shield 4.