User Manual

INSTALLATION FOR TWIN CAM CAM COVER

BDL's Polished Billet Aluminum Cam Cover will need an EVO style counter-clockwise rotation ignition to work

properly. All pictures below were taken on our cam cover cut away for easy viewing.

Pictured below is how the supplied seal must be installed, flat side of seal facing out.

The stock cam bolt and washer must be removed as pictured left and

the washer (inset picture) will not be used.

PAGE 1
INSTALLATION FOR TWIN CAM CAM COVER BDL's Polished Billet Aluminum Cam Cover will need an EVO style counter-clockwise rotation ignition to work properly. All pictures below were taken on our cam cover cut away for easy viewing. Pictured below is how the supplied seal must be installed, flat side of seal facing out. The stock cam bolt and washer must be removed as pictured left and the washer (inset picture) will not be used.
PAGE 2
Install the cam end adaptor and special bolt, supplied with kit, and make sure that the slot in the cam end adaptor is at the 7 o'clock position. Part # BDL-CC-100 Twin Cam - Cam Cover Fits Twin Cam applications. Part # BDL-CC-200 Cam end adaptor Part # BDL-CC-300 Special cam end bolt Part # BDL-CC-400 9934 seal Install stock washer and bolt and tighten.