Document NO.: WI-FHF- CS-FBA223BL -A Page 1of 9 MODEL: CS-FBA223BL REV : A/1 Date : 11 Jan 2018 Ni-MH Battery Specification 镍氢电池产品承认书 Project Name 产品名称:Ni-MH battery CS-FBA223BL 3.
Document NO.: WI-FHF- CS-FBA223BL -A Page 2of 9 MODEL: CS-FBA223BL REV : A/1 Date : 11 Jan 2018 TABLE OF CONTENTS 目录 1. PREFACE 序言 ................................................................... 3 2. TECHNICAL FEATURES 技术参数 .................................................... 4 3. TEST 测试 ...................................................................... 5 4. PROTECTION CAPABILITY TEST METHODAND REQUEST 保护性能检测与要求 ................ 8 5. CELL 电芯 ............................................
Document NO.: WI-FHF- CS-FBA223BL -A Page 3of 9 MODEL: CS-FBA223BL REV : A/1 Date : 11 Jan 2018 1. PREFACE 序 言 SCOPE(使用范围) Name(名称): Ni-MH battery(镍氢电池) Model(型号): CS-FBA223BL Spec(规格): 3.6V/2000mAh Edition(版本): A/1 This product approval sheet has 9 pages (include the first page) 本产品承认书共 9 页(含首页). This product approval sheet includes technical features, testing method, external connection graph, packing and so on. 本产品承认书包含:技术参数,检测方式,外形尺寸图外部连接图,包装等.
Document NO.: WI-FHF- CS-FBA223BL -A Page 4of 9 MODEL: CS-FBA223BL REV : A/1 Date : 11 Jan 2018 Item 项目 1.1 Rated Voltage 额定电压 1.2 Discharge Cut-off Voltage 放电终止电压 1.3 Rated Capacity 额定容量 1.6 Standard Charge Current 标准充电电流 1.7 Quick Charge Current 快速充电电流 1.8 Max Discharge Current 最大放电电流 1.9 Initial Internal Resistance 总内阻 1.10 Weight Per Battery 单体电池重量 外型尺寸 Charge 充电 1.12.Operating Temperature 1.13 Storage Temperature 性 Note 能 备注 3.6V 2.4V 0.2C Discharge 2000mAh 0.2C 放电 400mA 0.
Document NO.: WI-FHF- CS-FBA223BL -A Page 5of 9 MODEL: CS-FBA223BL REV : A/1 Date : 11 Jan 2018 3.1.2 Testing Environment(测试环境): Temperature (温度): 15℃--25℃ Relative Humidity(相对湿度): 45%--85% Atmospheric Pressure(大气压力): 76kPa--106kPa 3.2 Testing Instrument(测试工具): 3.2.1 Voltage meter 0.5 grade or more regulated by IEC 51/IEC 485, more than 10KΩ/V internal resistance 电压计 IEC 51/IEC 485 所规定的 0.5 级或以上, 内阻大于 10KΩ/V 3.2.2 Current meter 0.
Document NO.: WI-FHF- CS-FBA223BL -A Page 6of 9 MODEL: CS-FBA223BL REV : A/1 Date : 11 Jan 2018 between poles in battery connector. 内阻 交流测试法,半容量状态下,使用 AC 1kHz 检测方法,测量电池接口处正负极之间的 内阻. 1) Use nominal capacity charging method full charge the battery. 4 Discharging 按标称容量充电方法将电池充饱电. 放电平台 2) 1C constant current discharge to 2.4V Discharging time≥90min 放电时间≥90min 1C 恒流放电至 2.4V 的时间.
Document NO.: WI-FHF- CS-FBA223BL -A Page 7of 9 MODEL: CS-FBA223BL REV : A/1 Date : 11 Jan 2018 1) 9 Capacity Retention 电荷保持能力 In environmental temperature 20℃± 5 ℃ condition, Use nominal capacity charging method full charge the battery 在环境温度 20℃±5℃条件下, 按标 称容量充电方法将电池充饱电 2) Lay the battery opened circuit 28D, then 0.2C discharging time should no less than 3.20H. 0.2C 放电时间应不低于 3.20H. use 0.2C discharge it to cut off voltage 将电池开路搁置 28D,再以 0.
3 Pack Short-circuit Protection 短路保护 Document NO.: WI-FHF- CS-FBA223BL -A Page 8of 9 MODEL: CS-FBA223BL REV : A/1 Date : 11 Jan 2018 1) The battery is charged to rated capacity. 按标称容量充电方法将电池充饱电. 2) The battery is to be short-circuited by connecting the positive and negative terminals of the battery with thermocouple having a maximum resistance load of 0.3Ω 将接有热电偶的电池置于通风橱中,将电池 正负极用 0.3Ω电阻器持续短路。 Battery could not be burst, burn, leak and smoke After charging. 电池应不爆炸、不起火、不冒烟或漏液; 5.
Document NO.: WI-FHF- CS-FBA223BL -A Page 9of 9 MODEL: CS-FBA223BL REV : A/1 Date : 11 Jan 2018 P P- 是充放电负极 P N P+ 是充放电正极 7. Packing(包装) Packing method, as the customer required.