S T E A L T H I N S T A L L E D BELTRONICS 5442 West Chester Road West Chester OH 45069 USA USA 800-341-2288 www.beltronics.com ©2007 BELTRONICS Made in Canada Features, specifications and prices subject to change without notice.
Congratulations • Easy-to-use Programming lets you customize up to 7 features. • Exclusive AutoScan mode intelligently reduces unwanted false alarms. • Ultra-bright text-display provides easy to read information from any angle. • Tech Display provides actual numeric radar frequency for any radar signal. • Programmable Bands (on/off).
Quick Reference Card Table of Contents Remove card along perforations BELTRONICS STi-R Quick Reference Card Press the VOL/MUTE button to go from one category to the next PILOT (Power-on indication) VOICE SIGNAL STRENGTH METER AUTOMUTE BRIGHTNESS BANDS When KaSW is off, each Ka segment can be turned on or off Ka1 (33.392 - 33.704) ON or OFF Ka2 (33.704 - 33.896) ON or OFF Ka3 (33.886 - 34.198) ON or OFF Ka4 (34.184 - 34.592) ON or OFF Ka5 (34.592 - 34.808) ON or OFF Ka6 (34.806 - 35.
Quick Reference Guide Once your STi-R has been installed, just follow these simple steps 1 2 AutoMute STi-R’s patented AutoMute automatically reduces the volume level of the audio alert after a brief period. If you prefer, you can turn AutoMute off. Page 6 Press the PWR button, located on the left side of the controller, to turn the STi-R on/off. If installed to a switched accessory, the Sti-R will turn on/off with the vehicle’s ignition.
Controls and Features Power Voice Alerts To turn STi-R on or off, press the PWR button located on the front left side of the controller. When you turn STi-R on, it goes through a sequence of alerts. If you prefer, you may program your STi-R for a shorter power-on sequence. See the Programming section for details. Volume The “SENS” button selects the STi-R’s sensitivity mode. We recommend AutoScan mode for most driving.
Controls and Features Signal Strength Meter Audible Alerts The STi-R’s alphanumeric display consists of 280 individual LEDs, to provide an intuitive ultra-bright display of signal strength and text messages. The STi-R’s standard bar-graph signal strength meter displays band identification on a single radar signal. If there are multiple signals present, STi-R’s internal computer determines which is the most important threat to show on the bar-graph meter.
Programming Overview of Programming There are 7 user-selectable options so you can customize your STi-R for your own preferences. The buttons labeled VOL/MUTE and SENS are also used to enter the Programming Mode, REVIEW your current program settings, and to CHANGE any settings as desired. Pages 1214 explain each option in more detail. An example Here is how you would turn STi-R’s AutoMute feature off. How to use Programming 2 Then hold the VOL/MUTE button down.
Details of Programming Pilot (Power-on indication) Voice Pilot HWY (Full description) In this setting, the STi-R will display “Highway,” “AutoScan,” “City,” or “CityNox” as its power-on indication. (factory default) Voice On (Voice announcements on) In this setting, all radar, laser, and SWS messages (if programmed) will be announced using a digital voice. Pilot H (Letter) In this setting, the STi-R will display “H” for Highway, “A” for AutoScan,“C” for City, and “Cnx” for City NoX.
Details of Programming Technical Details Brightness Bands BrtAuto In this setting, the brightness for the display and backlit buttons are controlled automatically by a sensor that measures the ambient light in the vehicle. Sunlight will increase the brightness level, while dim or no light (night driving) will decrease the brightness. BandsDFT In this setting, the factory default settings for radar and laser are monitored.
Technical Details Interpreting Alerts Although the STi-R has a comprehensive warning system and this handbook is as complete as we can make it, only experience will teach you what to expect from your STi-R and how to interpret what it tells you. The specific type of radar being used, the type of transmission (continuous or instant-on) and the location of the radar source affect the radar alerts you receive.
Technical Details How Radar Works Because intrusion alarms and motion sensors often operate on the same frequency as X-Band or K-band radar, your STi-R will occasionally receive non-police radar signals. Since these transmitters are usually contained inside of a building, or aimed toward the ground, they will generally produce much weaker readings than will a true radar encounter.
Technical Details How TotalShield™ Technology Works How Safety Radar Works Beltronic’s TotalShield Technology keeps RF signals from radiating from the detector. Unlike other radar and laser detectors, which merely move their RF signals (local oscillators) to another frequency (which will be detectable by future detectordetectors), this revolutionary design keeps you unseen by current radar detectordetectors, including VG-2 and Spectre.
Troubleshooting Problem Possible Cause Problem Possible Cause STi-R beeps briefly at the same location every day, but no radar source is in sight. • An X-band or K-band motion sensor or intrusion alarm is located within range of your route. With time, you will learn predictable patterns of these signals. STi-R will not turn on. • Check the PWR is on. • Check that vehicle ignition is ON. STi-R does not seem sensitive to radar or laser. • STi-R may be in City Mode.
Service Warranty Service Procedure BELTRONICS One Year Limited Warranty If your STi-R ever needs service, please follow these simple steps: This warranty does not cover installation, removal or reinstallation charges. BELTRONICS is not liable for any incidental or consequential damages arising from the use, misuse, installation, or mounting of the STi-R.
beltronics .com 26 27 Remove card along perforations online: Primary reason for purchasing this BELTRONICS product____________________________________ 4. ____________________________________________________________________________ ____________________________________________________________________________ Place of Purchase__________________________________ Date_________ Price____________ 3.
Remove card along perforations ATTN CUSTOMER SERVICE BELTRONICS INC 5442 WEST CHESTER RD WEST CHESTER OH 45069-9789 28 I N S T A L L E D S T E A L T H