® EXO-120 Bluetooth Beanie
Contents 4 Product Overview 7 Getting Started 9 Operation Details 12 Troubleshooting 13 Washing Instructions 14 Specifications 16 FCC Statement 18 Safety Instructions 19 Warranty
Product Overview Thanks for purchasing the bem wireless EXO Active Gear Beanie! This beanie is Bluetooth ready, comfortable to wear, and the perfect way to keep you warm on cold days. It’s great for listening to music or simply taking a call when you’re out and about. But to make sure you get the best possible results from your new EXO Active Gear Beanie, please thoroughly read and carefully follow all instructions in this User Guide.
Product Overview (cont) The bēm wireless EXO Active Gear Beanie combines the convenience of Bluetooth with the comfort of a beanie. Simply pair your beanie with your Bluetooth enabled device and enjoy hands-free, wireless performance at home or on the go.
Meet Your EXO Active Gear Beanie 1 2 3 7 8 4 5 6 1. Control Panel 2. Mic 3. LED Indicator 4. Volume Down / Play Previous 5. Multifunction (Power / Pairing / Play or Pause / Answer or End Call / Redial) 6 6. Micro USB Port 7. Speaker 8.
Getting Started We know you’re excited to experience your new EXO Active Gear Beanie. And you should be. Luckily, these three easy steps will get you up and running quickly. Step 1: Charge It Remove the control panel from the beanie by easing the unit out of its pocket and toward the opening near the back, bottom of the beanie until you can remove it fully. Connect your EXO Active Gear Beanie to a PC/laptop using the Micro USB charging cable.
• • Activate the Bluetooth settings on your smartphone or other Bluetooth enabled device (refer to your device user guide for details). Your smartphone/device will now begin searching for other Bluetooth devices. When your smartphone/device finishes searching, select “EXO Beanie” from the device list. When connected, the LED Indicator will begin to flash blue once every 5 seconds and a beep will sound.
Operation Details The below instructions will help you get the most use out of your EXO Active Gear beanie. Power On After establishing an initial connection with a Bluetooth device, press and hold the MULTIFUNCTION button for approximately 3 seconds to turn on your EXO Active Gear Beanie. A two-tone chime will sound and the LED Indicator will begin flashing blue. The beanie will search for previously paired devices and automatically connect.
Volume Control Follow the below instructions to adjust the volume while music is playing or a call is in progress. 1. On your beanie: While music is playing or a call is in progress, press and hold the VOLUME UP or VOLUME DOWN buttons to adjust the volume. 2. On your device: Adjust the volume of your music / phone call as you normally would. NOTE: • Maximum Volume: A double beep will sound to indicate that the beanie is as loud as possible.
press the VOLUME DOWN button twice. Go to Next Song (Skip Forward): To skip ahead to the next song, press the VOLUME UP button. 2. On your device: Play, pause, skip and otherwise control your music as you normally would. Phone Operation Answer a Call: To answer a call, press the MULTIFUNCTION button. End a Call: To end a call, press the MULTIFUNCTION button. Redial the Last Number: The beanie must be in standby mode (paired, but not in use).
Troubleshooting Your EXO Active Gear beanie is designed to operate easily and reliably. However, problems can arise from time to time. If you need a little help, check out these common issues and solutions. Will Not Turn On • Your EXO Active Gear beanie may not be charged. Please charge for 2.5 hours. • Make sure to hold the MULTIFUNCTION button for approximately 3-5 seconds depending on desired operation.
Poor/Uncomfortable Fit • Try moving the hat to establish a comfortable position for the speakers. If issues persist, you can find additional suggestions and technical support at bemwireless.com/support. Washing Instructions To keep your EXO Active Gear beanie working well and looking sharp, you’ll need to wash the headband from time to time. ALL components (Control Panel and Speaker) MUST be removed before washing. Failure to remove speaker components will damage or destroy the electronics.
Washing (cont) Wash When ALL COMPONENTS ARE REMOVED, machine wash cold and air dry flat. Do NOT tumble dry. When fully dry, insert the control panel and the speaker back into the headband using the same easing method used to remove the units. Specifications Technical Specifications Note: All specifications are subject to change without notice. 14 Talk Time Up to 6 Hours Standby Time 60 Hours Charge Time 2.5 Hours Bluetooth Version 3.
Stay in Touch! For questions, comments, or to purchase additional bēm wireless products, go to: bemwireless.com. You can also follow us at: facebook.com/bemwireless twitter.com/bemwireless youtube.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement (cont) However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
Safety Instructions This product is specially designed based on full attention to safety; in order to encourage accident-free operation, please follow the guidelines listed below: • Do not drop, unpack, open, hit, bend, puncture, burn or otherwise attempt to damage/modify the set • Avoid using the set in the rain or near basins or sinks where parts may come in contact with water • Protect the set from all heat-producing devices, including radiators, forced air vents, cooking surfaces, and other heat-produci
Safety Instructions (cont) Warning • The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. • CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 90-Day Limited Warranty bēm wireless warranties this product against defects in materials and/ or workmanship under normal use for a period of NINETY (90) DAYS from the date of purchase by the original purchaser (“Warranty Period”).
Obtaining Service: To obtain warranty service, call bēm wireless at 1-815-337-0541 or e-mail support@bemwireless.com. Please be prepared to describe the product that needs service and the nature of the problem. A purchase receipt will be required. All repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary.
bēm wireless | Algonquin IL 60102 © 2015 bēm wireless