mobile speaker
Product Overview Thank you for purchasing the bēm wireless Mobile Speaker. Our speaker will bring you a new found freedom from wires while delivering an incredible sound. The Mobile Speaker is compatible with all devices enabled with Bluetooth© technology... which is currently a lot of devices! Product Interface ⑨ ① Make sure to read through the following directions, fully charge your device and perform the initial Bluetooth© syncing process and you should be up and running in no time.
Getting Started We know you’re excited to experience your new bēm wireless Mobile Speaker. These two easy steps will get you up and running quickly. Step 1: Charge It Connect your Mobile Speaker to an outlet using the USB charging cable and power adapter. The red LED light will slowly flash during charging and turn green when it has reached a complete charge (Approx. 2 hours).
Operation Details Power on / Power off Press the power button to turn on the Mobile Speaker. The Bluetooth© indicator will light up to signify the unit is on and ready to be paired. Press the power button again to turn off the unit and the Bluetooth© indicator light will go out. Please note, if the unit is not being used after 5 minutes the Mobile Speaker will automatically shut down to save battery power. Pressing the + and - buttons will increase or decrease the volume on the Mobile speaker.
Operation Details (cont.) Connect the Mini USB jack to the USB charging port on the unit. The charging indicator on the Mobile Speaker will light up while charging It will take about 2 hours to fully charge the Mobile speaker Charging Indicator Light Modes • • • Red LED / Flashing Fast: Battery is low, charge the unit soon.
More Info For questions, comments or to purchase more bēm wireless products go to: bemwireless.com You can also follow us at: facebook.com/bemwireless twitter.com/bemwirelessco youtube.com/bemwireless For information on your product's warranty go to: bemwireless.com/support Storage • • Power off the Mobile Speaker If the unit will not be used for an extended period of time. Do not set the unit in a damp environment, high temperatures or in direct sunlight. FCC STATEMENT 1.
Technical Parameters by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
Safety Instructions Safety Instructions (cont.) This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below: • • • • • • • • 14 Always position the unit on a stable and level surface.
