Instructions / Assembly

method instructed you may need to install a new version of the

Bluetooth© driver.

Please reference the instructions of device for details.

Charging

Connect the standard USB end of the supplied USB cable to a

USB power source (PC, USB power adapter…etc.)

Connect the Micro USB jack to the USB charging port on the

unit or power cradle. The charging indicator will light up while

charging. If you put Speaker Mojo into the power cradle, it will

charge them both at the same time weather you connect the

power to the Speaker Mojo or power cradle.

Please note, the Speaker Mojo LED charging indicator will not

light up when the speaker is charging on the Power Cradle

It will take about 2 hours to fully charge the Speaker Mojo alone,

3 hours to fully charge the power cradle and 5 hours for charging

them at the same time.

Charging Indicator Light Modes

Power indicator on Speaker Mojo

• Red LED / Flashing Fast: Battery is low, charge the unit soon;

• Red LED / Flashing Slow: Speaker Mojo is charging;

• Green LED: Battery is fully charged

Note: if the unit has not been used in the past 7 days please

charge for 10 minutes before using the Speaker Mojo

Indicator on power cradle

• Red LED : Charging, it will goes off when it is fully charged;

• Blue LED : power output is on.