Boom Box
Product Overview Thank you for purchasing the bēm wireless Boom Box. Our speaker will bring you a new found freedom from wires while delivering an incredible sound. The Boom Box is compatible with all devices enabled with Bluetooth© technology... which is currently a lot of devices! Product Interface Make sure to read through the following directions, fully charge your device and perform the initial Bluetooth© syncing process and you should be up and running in no time.
Getting Started We know you’re excited to experience your new bēm wireless Boom Box. These two easy steps will get you up and running quickly. Step 1: Charge It Connect your Boom Box to an outlet using the included power adapter. The red LED light will slowly flash during charging and turn green when it has reached a complete charge (Approx. 10 hours). Step 2: Connect It There are two options for connecting to your Boom Box - wirelessly by Bluetooth© or wired using the included aux cable.
Operation Details Power on / Power off Slide the power switch to turn on the Boom Box. The Bluetooth© indicator will light up to signify the unit is on and ready to be paired. Slide the power switch again to turn off the unit and the Bluetooth© indicator light will go out. Please note, if the unit is not being used after 5 minutes the Boom Box will automatically shut down to save battery power. Play modes Bluetooth mode: play an audio signal from the connected Bluetooth© device.
Operation Details (cont.) Troubleshooting The charging indicator on the Boom Box will light up while charging Issue: Pairing is unsuccessfully after multiple attempts It will take about 10 hours to fully charge the Boom Box Solution: Charging Indicator Light Modes • • • Red LED / Flashing Fast: Battery is low, charge the unit soon.
Maintenance More Info Please follow the instructions below for cleaning your Boom Box Power off the unit For questions, comments or to purchase more bēm wireless products go to: bemwireless.com Use a soft, dry, lint-free cloth and wipe gently You can also follow us at: • • • Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored facebook.com/bemwireless Storage twitter.com/bemwirelessco • youtube.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. bēm wireless http://bemwireless.com/ bēm wireless LLC. 1725 Kilkenny Ct. FCC STATEMENT (cont.
Safety Instructions This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below: • • • • • • • • 14 Always position the unit on a stable and level surface.