How to Guide

HOSPITALITY PLASTIC SEATS
18 1/2"
7 7/8"
19"
3 1/4"
14 1/4"
5 1/2"
1955CTJ
Seats shall be 1955CTJ as manufactured
by Bemis Manufacturing Co. Seats shall
be heavy weight and injection-molded of
solid plastic. Seats shall be open front less
cover for elongated bowl and feature large
molded-in bumpers. Seats shall have
STA-TITE
®
, Commercial Fastening
System
™
, featuring external check hinges
with 300 Series stainless steel posts and
pintles that stop seat 11 degrees beyond
vertical. Seats shall feature JUST•LIFT
®
integrated hinge system for ehanced
cleanability and hygiene. Color to be white.
Ring thickness is
1
”
Ring thickness including the bumper is
1-3
/16”
STA-TITE
®
, COMMERCIAL
FASTENING SYSTEM™,
ONE-PIECE INTEGRATED
NUT AND WASHER
JUST•LIFT
®
PROVIDES
1-1/2” OF LIFT HEIGHT FOR
ENHANCED CLEANABILITY
CONTOURED SEAT
Assemble hinges.
Using wrench,
tighten until lower
portion shears off.
Finger-tighten
fastening nuts.
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 Phone: [phone] Fax: [phone]
www.BemisSeats.com
©2009 0B7012247