Use and Care Guide

COMMERCIAL PLASTIC SEATS
18 1/2"
7 7/8"
19"
3 1/4"
14 1/4"
5 1/2"
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 Phone: [phone] Fax: [phone]
www.BemisSeats.com
©2007 0B701 2074
1955CTFR External check hinge stops seat 11°
beyond vertical.
1955SSTFR Stainless steel, self-sustaining and exter-
nal check hinge holds seat in any raised position up to
11° beyond vertical.
1955CTFR
Seats shall be No. ____________ as
manufactured by Bemis Manufacturing
Co. Seats shall contain DuraGuard
®
, an
antimicrobial agent. Seats shall contain
FirePro™, a fire retardant material to
meet UL-94VO flammability rating. Seats
shall be heavy weight and injection
molded of solid plastic. Seats shall be
open front less cover for elongated bowl
and feature large molded-in bumpers. wl
and feature large molded-in bumpers.
Seats shall have STA-TITE®, Commercial
Fastening System™, featuring external
check hinges with 300 Series stainless
steel posts and pintles that stop seat 11
degrees beyond vertical. Color to be white.
Hinges shall be 1955CTFR / 1955SSTFR
.
(Circle model based on description below.)
Ring thickness is
13
/16"
Ring thickness including the bumper is 1"
SERIESSERIES
STA-TITE®, COMMERCIAL
FASTENING SYSTEM™,
ONE-PIECE INTEGRATED
NUT AND WASHER
CONCEALED CHECK HINGE
Assemble hinges.
Using wrench,
tighten until lower
portion shears off.
Finger-tighten
fastening nuts.