Operating Guide

COMMERCIAL PLASTIC SEATS
18 1/2"
7 7/8"
19"
3 1/4"
14 1/4"
5 1/2"
SERIESSERIES
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 Phone: [phone] Fax: [phone]
www.BemisSeats.com
1955CT STA-TITE®, external check hinge stops seat
11° beyond vertical.
1955SSCT STA-TITE®, Stainless steel, self-sustaining
and external check hinge holds seat in any raised
position up to 11° beyond vertical.
1955CT
Seats shall be No. ____________ as
manufactured by Bemis Manufacturing Co.
Seats shall be heavy weight and injection-
molded of solid plastic. Seats shall be
open front less cover for elongated bowl
and feature large molded-in bumpers.
Seats shall have STA-TITE®, Commercial
Fastening System™, featuring external
check hinges with 300 Series stainless
steel posts and pintles that stop seat 11
degrees beyond vertical.
Color to be ____________.
(Specify white or fixture manufacturer’s color.)
Hinges shall be 1955CT / 1955SSCT.
(Circle model based on description below.)
Ring thickness is
1
"
Ring thickness including the bumper is
1-3
/16"
STA-TITE®, COMMERCIAL
FASTENING SYSTEM™,
ONE-PIECE INTEGRATED
NUT AND WASHER
CONCEALED CHECK HINGE
CONTOURED SEAT
Assemble hinges.
Using wrench,
tighten until lower
portion shears off.
Finger-tighten
fastening nuts.