Use and Care Guide

1955C
Seats shall be No. ____________
as manufactured by Bemis
Manufacturing Co. Seats shall be
heavy weight and injection-molded
of solid plastic. Seats shall be open
front less cover for elongated bowl
and feature large molded-in
bumpers. External check hinges
to feature 300 Series stainless steel
posts that stop seat 11 degrees
beyond vertical. Uses 300 Series
stainless steel hardware. Color to
be____________. (specify white or
fixture manufacturer’s color.)
Hinges shall be______________.
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 Phone: [phone] Fax: [phone]
www.bemisseats.com
COMMERCIAL PLASTIC SEATS
Ring thickness is
1
"
Ring thickness including the bumper is
1-3
/16"
EXTERNAL CHECK
HINGES WITH 300 SERIES
STAINLESS STEEL POST
EXTERNAL
CHECK HINGE
1955C PROFILE
18 1/2"
7 7/8"
19"
3 1/4"
14 1/4"
5 1/2"
1955C Open front less cover/external check
hinge stops seat 11° beyond vertical.
1955SSC Open front seat less cover/stainless
steel, self-sustaining and external check hinge
holds seat in any raised position up to 11°
beyond vertical.
SERIESSERIES