Use and Care Guide

HOSPITALITY PLASTIC SEATS
19"
5 1/2"
7 7/8"
18 1/2"
3 1/4"
14 1/4"
2155CTJ
Seats shall be 2155CTJ as manufactured by
Bemis Manufacturing Co. Seats shall contain
DuraGuard
®
, an antimicrobial agent. Seats
shall be heavy weight and injection molded
of solid plastic. Seats shall be open front
less cover for elongated bowl and
feature large molded-in bumpers. Seats
shall have STA-TITE
®
, Commercial Fastening
System
™
, featuring external check hinges
with 300 Series stainless steel posts and
pintles that stop seat 11 degrees beyond
vertical. Seats shall feature the JUST•LIFT
®
integrated hinge system for enhanced
cleanability and hygiene. Color to be white.
Ring thickness is
13
/16”
Ring thickness including the bumper is 1”
2155CTJ PROFILE
STA-TITE
®
, COMMERCIAL
FASTENING SYSTEM™,
ONE-PIECE INTEGRATED
NUT AND WASHER
JUST•LIFT
®
PROVIDES
1-1/2” OF LIFT HEIGHT FOR
ENHANCED CLEANABILITY
Assemble hinges.
Using wrench,
tighten until lower
portion shears off.
Finger-tighten
fastening nuts.
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 Phone: [phone] Fax: [phone]
www.BemisSeats.com
©2009 0B7012248