Operating Guide

Church Seats, Sheboygan Falls, WI 53085 Phone: [phone] Fax: [phone]
www.ChurchSeats.com
©2008 0B7082075
MODEL 2L2055T
Seats shall be No. 2L2055T as manufactured by Church Seats to allow an
additional 2" of height above the rim of the bowl. Seats shall contain
DuraGuard
®
, an antimicrobial agent. Seats shall be heavy weight and
injection molded of solid plastic. Seats shall be open front less cover for
round bowl and feature large molded-in bumpers. Seats shall have
STA-TITE
®
, Commercial Fastening System™, featuring concealed check
hinges with 300 Series stainless steel posts and pintles that stop seat 11
degrees beyond vertical. Color to be white.
Ring thickness is
13
/16"
Ring thickness including the bumper is 2"
Height of the seat is 3-
1
/4"
MEDIC-AID
®
SEATS
• 2" LIFT SEAT
• ROUND SEAT, OPEN FRONT LESS COVER
• HEAVY DUTY PLASTIC
• DURAGUARD
®
ANTIMICROBIAL AGENT
SERIES
16 1/8" 7 7/8"
16 5/8"
3 1/4"
14 1/4"
5 1/2"
• STA-TITE®, COMMERCIAL FASTENING SYSTEM™
Assemble hinges. Using wrench,
tighten until lower
portion shears off.
Finger-tighten
fastening nuts.
ADDITIONAL 2” OF HEIGHT
EXTERNAL CHECK HINGE
WITH 300 SERIES
STAINLESS STEEL BOLTS
STA-TITE®, COMMERCIAL
FASTENING SYSTEM™,
ONE-PIECE INTEGRATED
NUT AND WASHER