Use and Care Guide

8 3/8"
3 1/2"
14 3/4"
16 7/8"
16 1/8"
5 1/2"
HOSPITALITY PLASTIC SEATS
Chur
ch Seats, Sheboygan Falls, WI 53085
Phone: [phone] Fax: [phone]
www
.ChurchSeats.com
©2009 0B708 2200
MODEL 7750TDG
Seats shall be No. 7750TDG as manufactured by Church Seats. Seats
shall contain DuraGuard
®
, an antimicrobial agent. Seats shall be heavy
weight and injection molded of solid plastic. Seats shall be open front with
cover for round bowl and feature large molded-in bumpers. Seats shall
have ST
A-TITE
®
, Commer
cial Fastening System™, featuring external
check hinges with 300 Series Stainless Steel posts and pintles. Color to
be white.
Ring thickness is
13
/16"
Ring thickness including the bumper is 1-
1
/16"
Height of the seat with cover is 2-
5
/16"
• ROUND SEAT, OPEN FRONT WITH COVER
• HEAVY DUTY PLASTIC
EXTERNAL CHECK HINGE
WITH 300 SERIES
ST
AINLESS
STEEL BOL
TS
ST
A-TITE
®
,
COMMERCIAL
FASTENING SYSTEM™,
ONE-PIECE INTEGRA
TED
NUT AND WASHER
Using wrench,
tighten until lower
portion shears off.
Finger-tighten
fastening nuts.
• 300 SERIES STAINLESS STEEL HINGE AND BOLT
• DURAGUARD
®
ANTIMICROBIAL AGENT
• STA-TITE
®
, COMMERCIAL FASTENING SYSTEM™
0B7082200_7850T 2/10/09 10:11 AM Page 2