HAVEN 1000 OWNER’S MANUAL
TABLE OF CONTENTS PRODUCT INFORMATION Safety Precautions..................................................4 Parts................................................................................6 Product..........................................................................7 Dimensions..................................................................8 Controls.........................................................................9 INSTALLATION Installation..............................................
SAFETY PRECAUTIONS IMPORTANT SAFEGUARDS • When using electrical products, especially when children are present, basic safety precautions should always be followed. READ ALL INSTRUCTIONS BEFORE USING • For use with 120V 60Hz: Power supply must be a 15 Amp GFCI outlet. • The electrical cord must be connected to a GFCI outlet. • The GFCI outlet should be 1 ft. above the floor. • Install only in well-ventilated areas to avoid excess humidity. • Do not install in narrow toilet stalls or in shower stalls.
PARTS PRODUCT Power plug Lid Water supply hose Seat sensor Wash Bidet Operation panel Heated Seat Night Light 6 7
DIMENSIONS CONTROLS Elongated type NOZZLE CLEANING Activate while not seated. The nozzle cleans itself 3 times and extends for manual cleaning. 18.5(470) 15.9(406) 8.1(206) 4.7(120)~8.3(210) SEAT TEMP 6.8(173) Adjust the seat temperature. (off/low/mid/high) MASSAGE Activate the pulse function during Wash/Feminine/Turbo operation Adjust the nozzle position. ENERGY SAVING 1st: Automatic mode 2nd: Powerful mode 3rd: Off WATER TEMP Adjust the water temperature.
INSTALLATION 1. Remove the seat from the existing toilet body. 2. Install the T-Valve. 3. Fix the catch plate onto the toilet. 4. Push the main body toward the catch plate completely. Installation of T-valve Removal of water hose Align • Release the nuts, and then remove the seat and cover. • Store the seat in a proper place for future use. • Turn off the water. 10 • Remove the existing water hose and then install T-valve to the bottom of the toilet tank.
INSTALLATION CONT. 5. Connect bidet hose. • After installing the T-valve, connect the supplied bidet hose from the center of the T-valve to the bidet. • Connect the toilet hose to the bottom of the T-valve. 12 6. Turn on the water. • Make sure to check for leaks. 7. Plug it in! • Plug in and be sure that the nozzle comes out and retracts when powered on. • Do not plug the power cord with wet hands. Risk of electric shock.
HOW TO USE 1. Sit On The Toilet Seat 2. Wash, Bidet, Turbo 3. Massage 4. Child Function Seat sensor • Be sure to sit on the seat sensor. If the sensor is not occupied, all functions will not operate. • Skin to seat contact needs to occur to activate seat. • Selected function can be used as described. • When pressing the selected function again, the nozzle will oscillate back and forth to wash a wider range.
HOW TO USE (CONT.) 5. Nozzle Position Control • Nozzle position is adjustable (5 levels). 6. Water Pressure Control • Water pressure is adjustable. (5 levels) • If the water or screen filters become blocked, it may cause low water pressure. Regularly check the water and screens filters. 7. Stop • All operations will stop. • When pressing the stop button for 3 seconds, unit will turn off. • Press Stop, Wash, Bidet, or Turbo to turn on. 8. Seat Temperature Control • Seat temperature is adjustable.
HOW TO USE (CONT.) 9. Energy Saving Function • Eco 1 - This mode will be activated by pressing the Energy Saving button until the yellow LED light turns on. (Seat and water temperature will be kept at 32°C) 10. Nozzle Cleaning • When selecting Nozzle Cleaning while not seated, the nozzle cleans itself 3 times. Then nozzle extends and stop for manual cleaning process. • Eco 2 - This mode will be activated by pressing the Energy Saving button until the green LED light turns on.
HOW TO USE (CONT.) 13. Sitz Bath 14.Seat Sensor Bypass • Wash or Bidet is switched to Wash Sitz Bath or Bidet Sitz Bath if Nozzle Cleaning button is pressed during use. • The seat sensor can be activated and deactivated by pressing Massage button for 3 seconds. • Water pressure is switched to 1st level regardless of preset water pressure settings and Sitz Bath operates for 5 minutes.
MAINTENANCE & CLEANING Screen Filter Cleaning Extended Non-Use Cleaning the Unit Draining of Remaining Water Screen filter Water supply hose 1. Close the water valve. 2. Disconnect the water supply hose. Take the screen filter out and clean it with a soft brush. 3. Return the filter after cleaning and reconnect the water supply hose. 4. Open the water valve. • When bidet seat is not used for an extended period of time, unplug and drain the unit. 1.
SETTINGS TROUBLESHOOTING USER SETTING WITH THE REMOTE CONTROL PLEASE CHECK THE FOLLOWING POINTS BEFORE REQUESTING REPAIR SERVICE. Seat sensor ‘off’ No. Function Seat sensor ‘on’ Seat Status Regardless of on/off Switch Operation Description Initial Status 1 Silent mode “ ” For longer than 3 seconds To turn on/off the operating chime sound.
SPECIFICATIONS WARRANTY 1 YEAR WARRANTY ITEM BEMIS HAVEN 1000 Rated voltage 120V, 60Hz Max. Power consumption 870W Power cord length 1.2 m Water feed method Directly connects to water pipe Recommended inlet water pressure 99~106.6 psi Wash Feed Volume Heated Seat Wash 0.13~0.21 gal/min Bidet 0.13~0.18 gal/min Turbo 0.13~0.18 gal/min Child 0.13-0.
Thank You Technical Support/Customer Service 7900 S Route 31 Crystal Lake, IL 60014 T: 845.458.2334 U.S TOLL FREE: 877.339.5214 support@biobidet.com ToiletSeats.com biobidet.
