Owner's Manual

10 11
INSTALLATION
1. Remove the seat from
the existing toilet body.
• Release the nuts, and then
remove the seat and cover.
• Store the seat in a proper
place for future use.
• Turn off the water.
• Remove the existing water
hose and then install T-valve
to the bottom of the toilet
tank. Ensure the rubber
washer is properly seated and
attach the original water hose
to the T-Valve.
2. Install the T-Valve. 3. Fix the catch plate onto
the toilet.
• Point the arrow on the catch
plate towards the toilet tank.
• Push it until you hear a “click”.
• When the product is not
installed well, it may
cause leakage.
• Adjust as needed before
tightening bolts. Do not over
tighten the bolts.
4. Push the main body
toward the catch
plate completely.
AlignAlign
Removal of Removal of
water hosewater hose
InstallationInstallation
of T-valveof T-valve