Owner's Manual

14 15
HOW TO USE
1. Sit On The Toilet Seat
• Be sure to sit on the seat sensor.
If the sensor is not occupied, all
functions will not open.
2. Wash, Bidet, Turbo
• Selected function can be
used as described.
• When pressing the selected
function again, the nozzle will
oscillate back and forth to wash
a wider range.
• Press the button once again
to stop oscillate function
• The specialized water spray
in Turbo function helps relieve
constipation.
3. Dry Temperature Control
• Dryer operates for 3 minutes.
• Dryer temperature is adjustable
by pressing “+” or “-” buttons.
• Dryer effect will be improved if
you wipe the moisture before
operating the drying function.
4. Massage
• Press the Massage button after activating a cleansing
function for a pulsating effect.
5. Child Function
• Select this function to fully extend the nozzle and activate
a low pressure and low temperature wash.
6. Nozzle Position Control & Water Pressure Control
• Press the corresponding arrow buttons to adjust the nozzle
position and water pressure after a wash has been activated.
7. Stop
• Hold for 3 seconds to turn off. All operations wlil stop.
8. Energy Saving Function
• Yellow - Seat and water temperature will be maintained
at 89 F until occupied.
• Green - Seat and water heater are turned off until occupied.
• Off - Energy saving deactivated.
9. Seat/Water Temperature Control
• Press the corresponding button to cycle through the preset temperature
options for the water and seat. The seat temperature will automatically
reduce when occupied for more than 15 minutes.
10. Nozzle Cleaning
• Activates 3 rinse cycles before extending the nozzle for manual cleaning.
Press the stop button when finished.