Owner's Manual

4 5
UNIT & PARTS SEAT INSTALLATION
REMOTE
CONTROL
T-VALVE
(WITH RUBBER
GASKET)
1/2” CONVERSION
NUT (OPTIONAL)
BIDET HOSE
(1/2” to 1/2”)
TOILET HOSE
(7/8” to 3/8”)
CR2030 BUTTON
BATTERY (1pc)
CATCH
PLATE
INSTALL SCREW
ASSEMBLY
HAVEN BIDET SEAT
1. Attach Rubber Anchors 2. Attach the Mounting Plate
3. Attach the Bidet Seat 4. Seat Sensor
Remove the existing toilet seat and
insert the rubber anchors into the
mounting holes.
Slide the bidet seat all the way
on to the catch plate. You will hear
a click once the product is securely
mounted to the catch plate.
Place the catch plate and guides
over the mounting holes. Insert the
mounting screw and secure the catch
plate to the toilet.
This appliance is equipped with a
seat sensor and will not function
unless it is occupied.