Owner`s manual

Page 8

Check the tightness of the hold-down

screws before each use!

1/4-20 x 1" (black)

flat head phillips

machine screw

17. Install router and plate into the routertop.

Re-adjust the insert plate flush if necessary (see step 8).

Install the (2) 1/4-20 x 1" flat head phillips screws into the two

corners of the insert plate. These screws prevent side-to-side

movement and keep the insert plate firmly seated while

preventing excessive vibration. Do not over tighten as this

could damage the insert plate.

16. Mount router to the insert plate.

This insert plate is predrilled to fit most popular routers, and

comes with proper mounting screws for these routers. In some

cases, you must drill your own holes and purchase your own

mounting screws. Please reference the included template to

complete this step.

18. Install fence hang hooks.

Screw the hooks into the table about 3/8" and tighten the 1/4" jam

nuts with a 7/16" wrench.

19. Hang the fence when not in use.