Datasheet

ST72334J/N, ST72314J/N, ST72124J
115/153
SUPPLY CURRENT CHARACTERISTICS (Cont’d)
16.4.3 HALT and ACTIVE-HALT Modes
16.4.4 Supply and Clock Managers
The previous current consumption specified for
the ST7 functional operating modes over tempera-
ture range does not take into account the clock
source current consumption. To get the total de-
vice consumption, the two current values must be
added (except for HALT mode).
16.4.5 On-Chip Peripherals
Notes:
1. Typical data are based on T
A
=25°C.
2. All I/O pins in input mode with a static value at V
DD
or V
SS
(no load), CSS and LVD disabled. Data based on charac-
terization results, tested in production at V
DD
max. and f
CPU
max.
3. Data based on design simulation and/or technology characteristics, not tested in production. All I/O pins in input mode
with a static value at V
DD
or V
SS
(no load); clock input (OSC1) driven by external square wave, LVD disabled.
4. Data based on characterization results, not tested in production.
5. Data based on characterization results done with the external components specified in Section 16.5.3 and Section
16.5.4, not tested in production.
6. As the oscillator is based on a current source, the consumption does not depend on the voltage.
7. Data based on a differential I
DD
measurement between reset configuration (timer counter running at f
CPU
/4) and timer
counter stopped (selecting external clock capability). Data valid for one timer.
8. Data based on a differential I
DD
measurement between reset configuration and a permanent SPI master communica-
tion (data sent equal to 55h).
9. Data based on a differential I
DD
measurement between reset configuration and continuous A/D conversions.
Symbol Parameter Conditions Typ
1)
Max Unit
I
DD
Supply current in HALT mode
2)
V
DD
=5.5V
-40°C≤T
A
≤+85°C
<2
10
µA
-40°C≤T
A
≤+125°C 150
V
DD
=3.6V
-40°C≤T
A
≤+85°C 6
-40°C≤T
A
≤+125°C 100
Supply current in ACTIVE-HALT mode
3)
50 150
Symbol Parameter Conditions Typ
1)
Max
4)
Unit
I
DD(CK)
Supply current of internal RC oscillator 500 750
µA
Supply current of external RC oscillator
5)
525 750
Supply current of resonator oscillator
5) & 6)
LP: Low power oscillator
MP: Medium power oscillator
MS: Medium speed oscillator
HS: High speed oscillator
200
300
450
700
400
550
750
1000
Clock security system supply current 150 350
I
DD(LVD)
LVD supply current HALT mode 100 150
Symbol Parameter Conditions Typ Unit
I
DD(TIM)
16-bit Timer supply current
7)
f
CPU
=8MHz
V
DD
=3.4V 50
µA
V
DD
=5.0V 150
I
DD(SPI)
SPI supply current
8)
f
CPU
=8MHz
V
DD
=3.4V 250
V
DD
=5.0V 350
I
DD(ADC)
ADC supply current when converting
9)
f
ADC
=4MHz
V
DD
=3.4V 800
V
DD
=5.0V 1100