Instruction manual

DAC2 DX Instruction Manual Rev A Page 64
Balanced Analog Outputs
Number of Balanced Analog Outputs
2
Output Connector
Gold-Pin Neutrik™ male XLR
Output Impedance
60 Ohms (Attenuator off)
425 Ohms (Attenuator = 10 dB)
135 Ohms (Attenuator = 20 dB)
Analog Output Clip Point
+30 dBu
Factory Set Bypass Level (at 0 dBFS)
+24 dBu (Attenuator = 0 dB)
Output Level Range (at 0 dBFS) In ‘Variable’ Mode
Off to +24 dBu (Attenuator off)
Off to +14 dBu (Attenuator = 10 dB)
Off to +4 dBu (Attenuator = 20 dB)
Output Level Variation with Sample Rate (44.1 kHz vs.
96 kHz)
< +/- 0.006 dB
Unbalanced Analog Outputs
Number of Unbalanced Analog Outputs
4
Output Connector
RCA
Output Impedance
30 Ohms
Analog Output Clip Point
+13.5 dBu
Factory Set Home Theater Bypass Output Level (at 0
dBFS)
+8.2 dBu (2 Vrms)
Output Level Range (at 0 dBFS)
Off to +8.2 dBu
Output Level Variation with Sample Rate (44.1 kHz vs.
96 kHz)
< +/- 0.006 dB