Technical data

Page 9
DESIGN
TECHNICAL DATA
Connection Details/Dimensions - 215, 225 and 235 models
Figure 1.5
45
480 - Heating Flow
520 - Primary Return
560 - Heating Return
560 - Primary Flow
580 (620 including the door/clock)
560
530 - Domestic Hot Water
545 - Cold Feed
210
275
480
515
85
Connection Details/Dimensions
Diagrams opposite show the connection details
and dimensions for the BoilerMate A-Class OV
SOL appliance.
The BoilerMate A-Class OV SOL units are supplied
on an installation base to allow the pipe runs
to connect to the appliance from any direction.
It is easier if all pipes protrude vertically in the
cut out area shown. Compression or push fit
connections can be used. All pipe positions
are approximate and subject to a tolerance of
+/-20mm in any direction. A 15mm cold water
supply and a 22mm warning/overflow pipe
will also be required for the separate feed and
expansion tank.
Note: All dimensions are shown in mm and
are to the centre line of pipework/gland.
Connection Details/Dimensions - 245 model
Figure 1.6
55
530 - Heating Flow
585 - Primary Return
630 - Heating Return
630 - Primary Flow
650 (690 including the door/clock)
610
605 - Domestic Hot Water
630 - Cold Feed
240
295
525
565
110