Technical data
Page 7
BOILERMATE
A-CLASS
SP
1.0 DESIGN
1.2 TECHNICAL DATA
Note: The Appliance dimensions above do not allow for
the100mm high installation base
The following table of minimum cupboard dimensions only
allow the minimum space required for the appliance (including
the F & E cistern) and any extra space required for shelving etc
in the case of airing cupboards etc must be added.
Note: The above dimensions are based on the Appliance and
the F & E cistern being in the same cupboard.
If the standard manual fi ll model is chosen the height can be
reduced by 100mm.
If the appliance is to be connected to a multi-zone heating
then an additional 150mm must be added to the above
heights to accomodate the space required for the zone
equipment eg valves.
APPLIANCE DIMENSIONS
MODEL Height Width Depth
ABC
BMA 120 SP 960mm 530mm 595mm
BMA 140 SP 1000mm 530mm 595mm
BMA 180 SP 1040mm 530mm 595mm
BMA 200 SP 1145mm 530mm 595mm
BMA 220 SP 1300mm 530mm 595mm
MINIMUM CUPBOARD DIMENSIONS
MODEL Height Width Depth
DEF
BMA 120 SP 1710mm 630mm 600mm
BMA 140 SP 1750mm 630mm 600mm
BMA 180 SP 1790mm 630mm 600mm
BMA 200 SP 1895mm 630mm 600mm
BMA 220 SP 2050mm 630mm 600mm
"
%
MMMINCLEAROPENINGIF
LOCATEDDIRECTLYINFRONTOFTHE
APPLIANCE
-AINTENANCE
ACCESS
-INMAINTENANCE
ACCESSTOCOMPLYWITH
THE7ATER2EGULATIONS
#50"/!2$
&
#
MM
MM
MM
MM
MM
MM
$
!
&%#ISTERN
&%#ISTERN
PLAN
"OILER-ATE!#LASS