Instruction manual

DAC1 HDR Instruction Manual Rev I Page 45
Balanced Analog Outputs
Number of Balanced Analog Outputs 2
Output Connector Gold-Pin Neutrik™ male XLR
Output Impedance
60 Ohms (Attenuator off)
425 Ohms (Attenuator = 10 dB)
135 Ohms (Attenuator = 20 dB)
43 Ohms (Attenuator = 30 dB)
Analog Output Clip Point +30 dBu
Output Level Calibration Controls 10-turn trimmers (1 per output)
Calibration Adjustability 2 dB / turn
Output Level Range (at 0 dBFS) In ‘Calibrated’ Mode
+9 to +29 dBu (Attenuator off)
-1 to +19 dBu (Attenuator = 10 dB)
-11 to +9 dBu (Attenuator = 20 dB)
-21 to -1 dBu (Attenuator = 30 dB)
Factory Set ‘Calibrated’ Output Level (at 0 dBFS) +4 dBu (Attenuator = 20 dB)
Output Level Range (at 0 dBFS) In ‘Variable’ Mode
Off to +27 dBu (Attenuator off)
Off to +17 dBu (Attenuator = 10 dB)
Off to +7 dBu (Attenuator = 20 dB)
Off to -3 dBu (Attenuator = 30 dB)
Output Level Variation with Sample Rate (44.1 kHz vs.
96 kHz)
< +/- 0.006 dB
Unbalanced Analog Outputs
Number of Unbalanced Analog Outputs 2
Output Connector RCA
Output Impedance 30 Ohms
Analog Output Clip Point +13.5 dBu
Output Level Calibration Controls Shared with Balanced Outputs
Output Level Range (at 0 dBFS) In ‘Calibrated’ Mode -6 dBu to +13.5 dBu
Factory Set ‘Calibrated’ Output Level (at 0 dBFS) +8.5 dBu (2 Vrms)
Output Level Range (at 0 dBFS) In ‘Variable’ Mode Off to +11 dBu
Calibration Adjustability 2 dB / turn
Output Level Variation with Sample Rate (44.1 kHz vs.
96 kHz)
< +/- 0.006 dB