Instruction manual

DAC1 HDR Instruction Manual Rev I Page 46
HPA2
TM
Headphone Outputs
Number of Headphone Outputs 2
Output Connectors ¼” TRS with switch on left-hand jack
Output Impedance < 0.11 Ohms
Output Level Control Stereo Control on Front Panel
Output Level Range (at 0 dBFS) into 60-Ohm Load Off to +21 dBu
Maximum Output Current 250 mA
Overload Protection (independent per channel) Current limited at 300 mA, Thermal
Bandwidth > 500 kHz
THD+N -106 dB, 0.0005% into 30 Ohms at
+18 dBu (1.26W)
Status Display
Indicators - Type and Location 6 Blue LED’s on Front Panel
Selection/Status Indication Single Solid LED: Indicates ‘Normal’
volume mode with selected input
Single Flashing LED: Signal error on
selected input
All LED’s Solid: Indicates ‘Mute’ mode
Five LED’s Solid: Indicates ‘Dim’
mode, with unlit LED indicating
selected input
None: ‘OFF’ mode or no power