Instruction manual

DAC2 DX Instruction Manual Rev B Page 66
Balanced Analog Outputs
Number of Balanced Analog Outputs
2
Output Connector
Gold
-
Pin Neutrik™ male XLR
Output Impedance
60 Ohms (Attenuator off)
425 Ohms (Attenuator = 10 dB)
135 Ohms (Attenuator = 20 dB)
Analog Output Clip Point
+30 dBu
Factory Set Bypass Level (at 0 dBFS)
+
24 dBu (Attenuator =
0 dB)
Output Level Range (at 0 dBFS) In ‘Variable’ Mode
Off to +2
4
dBu (Attenuator off)
Off to +14 dBu (Attenuator = 10 dB)
Off to +4 dBu (Attenuator = 20 dB)
Output Level Variation with Sample Rate (44.1 kHz vs.
96 kHz)
< +/
-
0.006
dB
Unbalanced Analog Outputs
Number of Unbalanced Analog Outputs
4
Output Connector
RCA
Output Impedance
30 Ohms
Analog Output Clip Point
+13.5 dBu
Factory Set Home Theater Bypass Output Level (at 0
dBFS)
+
8.2
dBu (
2
Vrms)
Output Level Range (at 0
dBFS)
Off to +
8.2
dBu
Output Level Variation with Sample Rate (44.1 kHz vs.
96 kHz)
< +/
-
0.006 dB