Instructions / Assembly

BENCH PRO™ Workbench Assembly

...Rock Solid . Dewey.

1. Place your new workbench on top of a table with the

cardboard seam facing up. Open the carton. Do not

remove the cardboard yet.

2. Position the legs. If you have a lot of benches to do, we

recommend two man teams. If you have Static Control

benches, make certain the wrist strap jack is on the front

side of the leg.

3. Insert one bolt with lock washers into each leg.

4. Tighten until lock washer is flat. It doesn't have to be

tighter than that.

5. If you ordered drawers or CPU holders, assemble them

next. (Go to their individual web site pages for

instructions if needed. (benchdepot.com)

6. You're done. Turn it over. Its easier and safer with two

men. Toss out the cardboard. View drawer and other

options pages for their assembly.

PAGE 1
BENCH PRO™ Workbench Assembly ...Rock Solid . Dewey. 1. Place your new workbench on top of a table with the cardboard seam facing up. Open the carton. Do not remove the cardboard yet. 2. Position the legs. If you have a lot of benches to do, we recommend two man teams. If you have Static Control benches, make certain the wrist strap jack is on the front side of the leg. 3. Insert one bolt with lock washers into each leg. 4. Tighten until lock washer is flat. It doesn't have to be tighter than that.