Instructions / Assembly

BENCH PRO™ Workbench Assembly
...Rock Solid . Harding.
1. Place your new workbench on top of a table with the
cardboard seam facing up. Open the carton. Do not
remove the cardboard yet. If you ordered drawers or CPU
holders, assemble them before the legs. (Go to their
individual web site pages for instructions if needed.
(benchdepot.com)
2. Position the legs. If you have a lot of benches to do, we
recommend two man teams. If you have Static Control
benches, make certain the wrist strap jack is on the front
side of the leg.
3. Insert two screws with lock washers into each leg.
4. Tighten until lock washer is flat. It doesn't have to be
tighter than that.
5. You're done. Turn it over. Its easier and safer with two
men. Toss out the cardboard.