Instruction Manual

3
Purpose
The purpose of these Brake Application Guidelines is to provide original equipment manufacturer (OEM) builders of
medium and heavy duty trucks with information about which Bendix Spicer Foundation Brake products are approved
by Bendix Spicer Foundation Brake for use in common vocational applications in the USA and Canada.
Use of Guidelines
These Guidelines apply to the specifi c on, on-off, and off highway vocational categories and axle applications which
are listed, for vehicles operated in the USA and Canada. The categories equate to the commodity and service
categories used by OEM truck builders. Within each category, Bendix Spicer Foundation Brake has approved the
steer axle brake and drive axle brake applications shown in the table (subject to any applicable notes), provided that
the vehicle falls within the “Defi nitions” and “Typical Vehicle Types” and meets the “General Requirements” set out
for that category. Brake approval is based on gross axle weight rating (GAWR), static loaded radius of tire (SLR), air
chamber size, brake adjuster length (S-cam brake only), and the brake lining material.
These Guidelines do not apply to the use of Bendix Spicer Foundation Brake products in vehicles operated outside
the USA and Canada, in vocational categories or axle applications other than those specifi ed herein, for duty cycles
or ratings other than those listed herein, for vehicles with fi xed liftable auxiliary axles (tag or pusher) or for any off-
road applications. Approval for such uses may be requested on an individual basis by submitting a Brake Application
Approval Request Form to the Bendix Spicer Foundation Brake Application Engineering Department at the address
below.
Brake Warranties
Bendix Spicer Foundation Brake warranties for steer axle, drive axle and trailer brakes are set out in the Bendix
Spicer Foundation Brake Applications and Installations (BW7216) must either meet the requirements of these
Guidelines for automatic approval or be approved by the Bendix Spicer Foundation Brake Application Engineering
Department. Failure to obtain application approval or the use of Bendix Spicer Foundation Brakes or their
components in non-approved applications will void the Bendix Spicer Foundation Brake warranty coverage.
Modifi cation of the vehicle or brake confi guration, changes in the vocational use, or service outside the limits of these
Guidelines may void the Bendix Spicer Foundation Brake warranty coverage.
Questions
For answers to questions concerning these Guidelines or to request a Brake Application Approval Request Form for a
use not covered by these Guidelines, contact one of the following:
Bendix Spicer Foundation Brake LLC Roadranger
™
Sales and Service Offi ce
866-610-9709 800-826-HELP (826-4357)
www.foundationbrakes.com 24 hours a day in the USA and Canada
Changes to Guidelines
These Guidelines are subject to change at any time, without prior notice, at the discretion of Bendix Spicer
Foundation Brake LLC.
For updates visit www.foundationbrakes.com
Effective Date: [October 2007]
Important Information about These Guidelines