User guide

SECTION IX - TESTING FOR FALSE INDICATION CAUSED BY WHEEL SPEED COMPONENTS

START HERE

YES

RUN VEHICLE AT 7 MPH OR MORE

FOR 5 SECONDS OR MORE. TURN

OFF IGNITION

REPEAT "INITIAL START-UP

PROCEDURE"

TURN THE IGNITION OFF AND INSPECT

APPROPRIATE AXLE AND WHEEL FOR

PRESENCE OF AN EXCITER OR TONE RING

AND SPEED SENSOR. CHECK SENSOR

“GAP” (DISTANCE BETWEEN SPEED

SENSOR AND EXCITER RING) AND

BEARING END PLAY. RE-ADJUST AS

NECESSARY.

WITH IGNITION ON, HOLD A

MAGNET ON RESET OF EC-16

™

CONTROLLER AND NOTE LEDs

All LEDs

Illuminated?

Magnet

here

EC-16

™

CONTROLLER

DIAGNOSTIC DISPLAY

ARE ALL LEDs ILLUMINATED?

REPLACE EC-16

™

CONTROLLER

REMOVE MAGNET