User's Manual

SmarTire Systems Inc.
Tire Monitoring System Reference Manual
6/13/2000 Page 32 of 55
This manual is under review by SmarTire – DO NOT ISSUE
Low-Pressure Warning
This function changes the low-pressure warning
threshold for each axle.
To choose this mode press the TIRE button when the flat tire
icon and the pressure unit are displayed.
The tires of the selected axle are filled in. Use the TIRE
button to scroll to the desired axle.
Press the MODE button to select the axle. The current value
is shown. Press the TIRE or MODE button to increase or
decrease the value respectively. Lowest is 5 PSI. Highest is
92 PSI. Hold a button down to scroll the values rapidly.
When the desired value is set, press the SET button to save
and return to the axle selection menu. Scroll to a different
axle using the TIRE button again, or press the SET button to
exit this mode.
NOTE:
If this value is changed to exceed the low-pressure alert threshold, the alert threshold value will
be adjusted so that the warning threshold value is not greater than the alert threshold value.