User's Manual

SmarTire Systems Inc.
Tire Monitoring System Reference Manual
6/13/2000 Page 41 of 55
This manual is under review by SmarTire – DO NOT ISSUE
Low Pressure Warning
PSI | Bar
A Low Pressure Warning is initiated when the actual pressure drops below the value
programmed for the wheel on that axle. For example if the setting is 26 PSI for the rear axle and
an actual pressure of 24 PSI is detected, the MFD will initiate a Low Pressure Warning.
The beeper turns on and off continuously and the alarm light flashes. Press a button to stop the
beeping and flashing. The display reverts to standby with the alarm light on continuously. Press
the tire button to find the affected tire. The flat tire icon, the alert icon, PSI, the pressure reading
and alarm light will all be on.
Alarm condition detected (beep and flashing light
alternates with pressure reading)
Display tire condition
Detecting Excessive Tire Air Temperature
High Temperature Warning
º C | ºF
The MFD reads the temperature value sent by the wheel transmitters and compares it to a
programmed setting. If the actual temperature exceeds this setting the High Temperature Alert is
initiated.
Alarm condition detected (beep and flashing light
alternates with temperature reading)
Display tire condition