User's Manual

SmarTire Systems Inc.
Tire Monitoring System Reference Manual
6/20/2000 Page 18 of 56
This manual is under review by SmarTire – DO NOT ISSUE
Pressure Alert Full Function Display
Kit # 061.4000 LCD-I
Kit # 061.4001 LCD-R
Overview
The full function display is used with any existing system to extend the functionality of the basic
tire pressure monitoring system up to 20 tire positions. It provides a digital pressure and
temperature readout as well as diagnostic data such as transmitter battery life for each tire. The
user can also set his own pressure warning levels and adjust other parameters to suit a particular
tire.
Two models of the LCD exist, differing by their method of connecting to the base receiver. The
LCD-I clips onto the front of the receiver, while LCD-R is connected via a 6 ft. interconnecting
cable.
To install, remove the basic receiver bezel. Clip the LCD-I unit onto the front of the base
receiver (or connect the cable in the case of the LCD-R).