User's Manual

SmarTire Systems Inc.
Tire Monitoring System Reference Manual
6/20/2000 Page 32 of 56
This manual is under review by SmarTire – DO NOT ISSUE
Low-Pressure Warning
This function changes the low-pressure warning
threshold for each axle.
• To choose this mode press the TIRE button when the flat
tire icon and the pressure unit are displayed.
• The tires of the selected axle are filled in. Use the TIRE
button to scroll to the desired axle.
• Press the MODE button to select the axle. The current
value is shown. Press the TIRE or MODE button to
increase or decrease the value respectively. Lowest is 5
PSI. Highest is 92 PSI. Hold a button down to scroll the
values rapidly.
• When the desired value is set, press the SET button to
save and return to the axle selection menu. Scroll to a
different axle using the TIRE button again, or press the
SET button to exit this mode.
NOTE:
If this value is changed to exceed the low-pressure alert threshold, the alert threshold value will
be adjusted so that the warning threshold value is not greater than the alert threshold value.