User's Manual

SmarTire Systems Inc.
Tire Monitoring System Reference Manual
6/20/2000 Page 35 of 56
This manual is under review by SmarTire – DO NOT ISSUE
Diagnostic Modes - Level 2
The following modes are found under the Diagnostic menu, which are accessed by holding the
SET button in Stand-By mode or Programming menu for 5 seconds. The MODE button is used
to scroll through each diagnostic mode.
• Slope (SL)
• Transmitter battery voltage (diagnostic function)
• Learn mode (set tire ID)
Slope
Use this mode to change the slope value used to calculate
the required pressure for each axle in this mode.
• To choose this mode press the TIRE button when “SL” is
displayed.
• Press the TIRE button to select an axle.
• Press the MODE button to display the current value of
slope for the selected axle.
• Press TIRE and MODE buttons to increase and decrease
the value respectively. The minimum value is 10 and the
maximum is 160.
• Press the SET button to save the value.
• Press the TIRE button to select another axle for
programming.