Manual

14
The Active Cruise Control with Braking Feature
NOTE: Whenever the cruise control is set, the active cruise control with
braking feature is also set.
Setting Cruise Control
Examples of cruise control switches
First, switch on the cruise control. Accelerate your vehicle to the cruise
control speed you wish to maintain, then press the cruise control set
switch. The active cruise control with braking feature is now ready and
will help you maintain a set following distance.
Once the cruise control speed is set, a green cruise-enabled icon (or
similar) will illuminate on the instrument panel. If the cruise-enabled
(or similar) icon does not illuminate, the cruise control is not functioning
normally. Please refer to your vehicle operator’s manual to double-check
the location of the icon and for further
troubleshooting information.
Some vehicle manufacturers use the
instrument cluster to momentarily show the
cruise control set speed to the driver.
Where the Driver Interface Unit (DIU)
display is used, a text message will provide
the set speed information.
The driver can switch the active cruise
control with braking feature off manually
by either stepping on the brake, or by
switching OFF the cruise control.
Example of Driver
Interface Unit (DIU)
detected forward
vehicle display