User Guide
Table Of Contents
- 1. INTRODUCTION
- 2. GETTING STARTED
- 3. AVIATION MODE OPERATION
- BASIC OPERATION
- VFR MOVING MAP FUNCTION
- FLIGHT PLAN FUNCTION
- WEATHER FUNCTION
- HARDWARE ACCESSORY
- RECEIVING WEATHER DATA
- XM WEATHER INFORMATION PRODUCTS
- NEXRAD Composite Reflectivity (USA and Canada)
- Graphical METARs (USA and Canada)
- Graphical PIREPs (USA only)
- Graphical AIRMETs (USA only)
- Graphical SIGMETs (USA only)
- Graphical Conv-SIGMETs (USA only)
- Graphical Winds Aloft (USA only)
- Graphical Freezing Level
- Text METARs (USA and Canada)
- Text TAFs (USA and Canada)
- Text PIREPs (USA only)
- Text AIRMETs (USA only)
- Text SIGMETs (USA only)
- Text Conv-SIGMETs (USA only)
- Legend
- XM OVERLAYS
- TRAFFIC FUNCTION
- AUXILIARY FUNCTION
- SYSTEM SETUP FUNCTION
- 4. AUTOMOTIVE MODE OPERATION
- WARNINGS AND SAFETY INFORMATION
- GLOSSARY
- GETTING STARTED
- SIMPLE AND ADVANCED MODES
- SOFT KEYS AND CONTROLS ON THE SCREEN
- ADVANCED FUNCTIONS
- Smart Zoom
- Position Markers
- Current GPS Position and Lock-on-Road
- Returning to Normal Navigation
- Selected Location (Cursor)
- Original Position in the Cursor Menu
- Daytime and night color schemes
- Color scheme in tunnels
- Route Calculation and Recalculation
- Itinerary
- Track Logs
- Route demonstration
- POI (Points of Interest)
- Saving POI
- Managing POI
- Road Safety Cameras
- Saving Road Safety Cameras
- Camera Warning
- Camera Types
- Camera Directions
- Speed limit warning
- TMC (Traffic Message Channel)
- ADVANCED FEATURES IN GODRIVE VERSION 8.3
- SELECTING THE DESTINATION OF A ROUTE
- Selecting the Cursor as the destination
- Entering an address or part of an address
- Entering an Address (Europe)
- Entering an Address (North America, Australia)
- Entering an Address if house numbering is restarted
- Enter an Address without knowing the district/suburb
- Selecting an Intersection as the Destination
- Selecting a City Center as the Destination
- Entering an Address with a Postal Code
- Tips on Entering Addresses Quickly
- Selecting the destination from your Favorites
- Selecting the destination from the POIs
- Selecting the destination with saved POI search criteria
- Selecting the destination from the History
- Selecting the destination by entering its coordinate
- CREATING A MULTI-POINT ROUTE (INSERTING A VIA POINT)
- CREATING A MULTI-POINT ROUTE (APPEND A NEW DESTINATION)
- EDITING THE ROUTE
- VIEWING WHOLE ROUTE ON THE MAP (FIT TO SCREEN)
- WATCHING THE SIMULATION OF THE ROUTE
- ENABLING SAFETY MODE
- PAUSING THE ACTIVE ROUTE
- DELETING THE NEXT VIA POINT FROM THE ROUTE
- DELETING THE ACTIVE ROUTE
- USING TRACK LOGS
- SELECTING THE DESTINATION OF A ROUTE
- REFERENCE BOOK (ADVANCED MODE)
- 5. MULTIMEDIA
- 6. SYSTEM SETTINGS
- 7. APPENDIX
AV8OR Ace User’s Guide Table of Contents
Pub. No.D200904000003 Page – TC 2 Rev 1 Jul 2009.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Auto Zoom ................................................................... 3-35
Change View ............................................................... 3-36
Airports ............................................................................. 3-43
Rnwys Tab ................................................................... 3-43
SELECT RUNWAY Soft Key ....................................... 3-44
CHARTS Soft Key ....................................................... 3-46
Airport Information Window ......................................... 3-47
Comms Tab ................................................................. 3-48
Fuel Tab ....................................................................... 3-49
Svcs Tab ...................................................................... 3-51
Local Tab ..................................................................... 3-51
NEAREST – Select Nearest Destination ......................... 3-52
Nearest Airports ........................................................... 3-54
Nearest VORs .............................................................. 3-56
Nearest User Wpts ...................................................... 3-56
Nearest Towns and Cities............................................ 3-57
Waypoint Alert .................................................................. 3-58
Turn Anticipation .............................................................. 3-59
DIRECT-TO Navigation .................................................... 3-60
Create a Direct-To course from the Map ..................... 3-60
Create a Direct-To course from the keyboard entry
(No Flight Plan) ............................................................ 3-61
Re-center aircraft when Direct-To is already enabled . 3-64
Bypass a WPT with a flight plan active ........................ 3-64
Enter a Direct-To WPT with a flight plan active. .......... 3-65
PTR MENU....................................................................... 3-67
Create a User Waypoint .............................................. 3-67
Center the Map around Pointer Position ..................... 3-69
PTR MENU – DIRECT-TO Navigation ............................. 3-70
To select a user defined point on the map: ................. 3-70
PTR MENU – OBS Navigation ......................................... 3-70
To select a NAVAID point on the map: ........................ 3-70
To select a user defined point on the map: ................. 3-71
Center Map ...................................................................... 3-72
Center To WPT/Center Aircraft ................................... 3-73
Selectable GPS Data Source ...................................... 3-74
AUTONAV ........................................................................ 3-74
STOP WATCH ................................................................. 3-75
FLIGHT PLAN FUNCTION ...................................................... 3-77
User Waypoints .................................................................... 3-77
User Waypoint Icons ........................................................ 3-79