User Guide

AV8OR Ace User’s Guide Aviation Mode Operation
Traffic Function
Pub. No D200904000003 Page 3-153 Rev 1 Jul 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Fields on The Traffic Page:
• Traffic Alerts targets show as a solid yellow circle.
Traffic alerts are used for targets within 0.7 nm range and
within 700 ft of the same altitude.
•
Traffic Advisories targets show as a white diamond
icon. Traffic advisories are used for targets outside the
Traffic Alerts zone and within 2.0 nm and 1000 ft altitude.
•
Other targets show as a black diamond with a white
border. The black diamond icon is used for targets that are
outside the Traffic Alerts zone and the Traffic Advisories
zone.
•
The altitude of traffic target is shown above the target
symbol if the aircraft is above own aircraft altitude.
• Altitude of traffic target is shown below the target symbol if
the aircraft is above own aircraft altitude.
•
A vertical trend is shown with a down arrow to the
right of the target symbol if altitude trend down is 500 ft/min
or greater. The Altitude trend is shown with an up arrow to
the right of the target symbol if altitude trend up is 500 ft/min
or greater.
Traffic Setup
Tap the TRAFFIC SETUP soft key on the Traffic page to change the
setup settings as shown in the figure below.