User Guide
Table Of Contents
- 1. INTRODUCTION
- 2. GETTING STARTED
- 3. AVIATION MODE OPERATION
- BASIC OPERATION
- VFR MOVING MAP FUNCTION
- FLIGHT PLAN FUNCTION
- WEATHER FUNCTION
- HARDWARE ACCESSORY
- RECEIVING WEATHER DATA
- XM WEATHER INFORMATION PRODUCTS
- NEXRAD Composite Reflectivity (USA and Canada)
- Graphical METARs (USA and Canada)
- Graphical PIREPs (USA only)
- Graphical AIRMETs (USA only)
- Graphical SIGMETs (USA only)
- Graphical Conv-SIGMETs (USA only)
- Graphical Winds Aloft (USA only)
- Graphical Freezing Level
- Text METARs (USA and Canada)
- Text TAFs (USA and Canada)
- Text PIREPs (USA only)
- Text AIRMETs (USA only)
- Text SIGMETs (USA only)
- Text Conv-SIGMETs (USA only)
- Legend
- XM OVERLAYS
- TRAFFIC FUNCTION
- AUXILIARY FUNCTION
- SYSTEM SETUP FUNCTION
- 4. AUTOMOTIVE MODE OPERATION
- WARNINGS AND SAFETY INFORMATION
- GLOSSARY
- GETTING STARTED
- SIMPLE AND ADVANCED MODES
- SOFT KEYS AND CONTROLS ON THE SCREEN
- ADVANCED FUNCTIONS
- Smart Zoom
- Position Markers
- Current GPS Position and Lock-on-Road
- Returning to Normal Navigation
- Selected Location (Cursor)
- Original Position in the Cursor Menu
- Daytime and night color schemes
- Color scheme in tunnels
- Route Calculation and Recalculation
- Itinerary
- Track Logs
- Route demonstration
- POI (Points of Interest)
- Saving POI
- Managing POI
- Road Safety Cameras
- Saving Road Safety Cameras
- Camera Warning
- Camera Types
- Camera Directions
- Speed limit warning
- TMC (Traffic Message Channel)
- ADVANCED FEATURES IN GODRIVE VERSION 8.3
- SELECTING THE DESTINATION OF A ROUTE
- Selecting the Cursor as the destination
- Entering an address or part of an address
- Entering an Address (Europe)
- Entering an Address (North America, Australia)
- Entering an Address if house numbering is restarted
- Enter an Address without knowing the district/suburb
- Selecting an Intersection as the Destination
- Selecting a City Center as the Destination
- Entering an Address with a Postal Code
- Tips on Entering Addresses Quickly
- Selecting the destination from your Favorites
- Selecting the destination from the POIs
- Selecting the destination with saved POI search criteria
- Selecting the destination from the History
- Selecting the destination by entering its coordinate
- CREATING A MULTI-POINT ROUTE (INSERTING A VIA POINT)
- CREATING A MULTI-POINT ROUTE (APPEND A NEW DESTINATION)
- EDITING THE ROUTE
- VIEWING WHOLE ROUTE ON THE MAP (FIT TO SCREEN)
- WATCHING THE SIMULATION OF THE ROUTE
- ENABLING SAFETY MODE
- PAUSING THE ACTIVE ROUTE
- DELETING THE NEXT VIA POINT FROM THE ROUTE
- DELETING THE ACTIVE ROUTE
- USING TRACK LOGS
- SELECTING THE DESTINATION OF A ROUTE
- REFERENCE BOOK (ADVANCED MODE)
- 5. MULTIMEDIA
- 6. SYSTEM SETTINGS
- 7. APPENDIX
AV8OR Ace User’s Guide Aviation Mode Operation
System Setup Function
Pub. No D200904000003 Page 3-175 Rev 1 Jul 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
• CDI Scale: Sets the full scale deflection of any displayed Course
Deviation Indicator (CDI) to: 0.6, 2 or 10 kilometers, 0.3, 1, or 5
nautical miles or 0.4, 1 or 5 statute miles. Values are based on
the distance units that are configured in the General System
Setup Options table distance units field. The CDI is configured on
the Data Field Setup Page in System Setup.
• Time Zone: The AV8OR ACE has an on board clock that
ensures the Estimated Time of Arrival (ETA) information
presented is accurate. The time is stored in two summed parts as
UTC (Universal Coordinated Time or Greenwich Mean Time) and
as a Local Offset. The system Global Positioning System (GPS)
acquires the correct UTC time at Power-up and maintains it
accurately. The following Time Zone value can be set:
o LCL (Local Time) Offset from UTC – user
configurable offset from UTC User defined
o UTC (Universal Time) Offset from UTC 0:00
o GST (Greenland Standard Time) Offset from UTC -
3:00
o GDT (Greenland Daylight Saving Time) Offset from
UTC -2:00
o ATS (Atlantic Standard Time) Offset from UTC -4:00
o ATD (Atlantic Daylight Saving Time) Offset from
UTC -3:00
o EST (Eastern Standard Time) Offset from UTC -5:00
o EDT (Eastern Daylight Saving Time) Offset from
UTC -4:00
o CST (Central Standard Time) Offset from UTC -6:00
o CDT (Central Daylight Saving Time) Offset from
UTC -5:00
o MST (Mountain Standard Time) Offset from UTC -
7:00
o MDT (Mountain Daylight Saving Time) Offset from
UTC -6:00
o PST (Pacific Standard Time) Offset from UTC -8:00