User Guide

AV8OR Ace User’s Guide Automotive Mode Operation
Pub. No D200904000003 Page 4-22 Rev 1 Jul 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Icon Status
for
More information
The
battery
is being
charged
The device is running on external power.
The battery is being charged.
Vehicle
type
The symbol displays the vehicle type used
for route calculation.
Using the Cursor (the selected map location)
First, place the Cursor at the desired map location with one of the
following options:
• Use the Find menu to select a location. The map returns with the
selected point (the Cursor) in the middle, and the Cursor menu
appears with the available options.
• Tap the screen and tap again to place the Cursor at the desired
location. Now tap
to open the Cursor menu.
You can perform the following actions:
Soft Key Action
In the active route, uses the Cursor as the
start point by replacing the current GPS
position (available in Advanced mode
only)
In the active route, uses the Cursor as the
destination by replacing the previous
destination
In the active route, uses the Cursor as a
via point (an intermediate destination)
preceding the destination (available in
Advanced mode only)
In the active route, uses the Cursor as the
destination while keeping the previous
destination as a via point (available in