User Guide

AV8OR Ace User’s Guide Automotive Mode Operation
Pub. No D200904000003 Page 4-43 Rev 1 Jul 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
4. Pick the street from the list.
6. Enter the house number:
1. Tap
.
2. Enter the house number on the keyboard.
3. Tap to finish entering the address.
7. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Entering an Address if house numbering is restarted
There are long roads where the house numbering is restarted at
some point. This way the same house number can appear twice or
even more times on the same road. If this is the case, after giving
the house number, you need to select the appropriate address by
the district/suburb information.
The procedure is explained starting from the Navigation menu.
1. Tap the following soft Keys:
(Simple mode), or
, , (Advanced mode).
2. By default, GoDrive proposes the country/state and settlement
where you are. If needed, tap the soft Key with the name of the
country/state, and select a different one from the list.
3. If needed, change the settlement:
• To select the settlement from the list of recently used ones,
tap the
soft Key.
• To enter a new settlement:
1. Tap the soft Key with the name of the settlement, or if
you have changed the country/state, tap