Specifications

3
c
VOR USE DSP
KNS 80 NAV SYSTEM
RNV/ENR disappears from the mode annunciation space on
your KNS 80 and VOR appears. The distance display will change
to
42 0 (because it now shows distance to the VORTAC instead of
to the waypoint). Groundspeed (KTS) and time-to-station (MIN)
displays will also change accordingly.
the
SGF VORTAC. However, the CDI will display conventional
(angular) crosstrack deviation
of +lo" full scale.
Center the needle on your CDI
to show the course direct to
-
PAR L 3 CI
VOR USE DSP
KNS 80 NAV SYSTEM'
15. Push\the VOR button again and you will have the convenience of
VOR/PAR mode with linear crosstrack deviation displayed on
your CDI as
&5 nm full scale (as in RNV/ENR). This permits you to
fly accurately direct to the station or on a parallel course up to 5
nm either side of the direct course.
Tune an ILS frequency without losing DME
16. If you decide to land at Springfield Municipal but want to retain
DME, depress the HOLD button. Now you can select your ILS
frequency (109.90) using the data input controls and checking it in
the data display. HLD will now annunciate. Your distance will
continue
to read to the VORTAC and VOR/PAR function will remain
annunciated along with the active
ILS function. If you're within
receiving range of the LOC or
GS, deviation will appear on the HSI
or CDI.
and you will revert back
to VOR/PAR mode. HLD will cancel since
If you now reselect 116.90, the
ILS annunciation will cancel
18