Specifications

CAB AND FRAME ACCESS
– 10 – Y53-6008A
Medium Duty (R05/09)
• Use even more care when steps and handholds (or
footwear) are wet, coated with ice, snow, mud, oil,
fuel, or grease.
WARNING! Always reinstall the battery com-
partment cover (step) before entering the cab.
Without the battery cover you could slip and
fall, resulting in possible injury to yourself.
WARNING! Do not step on vehicle compo-
nents without antiskid surfaces or use com-
ponents not designed for entry-and-exit use.
You could fall and injure yourself if you step
onto a slippery surface. For example:
• Do not step onto the surface of a fuel tank.
A fuel tank is not a step. The tank surface
can get very slippery, and you might not be
able to prevent a fall. Use only the steps and
handholds provided, not chain hooks, quar-
ter fenders, etc.
• Do not climb onto and off the deck plate—
use steps and grab handle provided. If there
is no deck plate, or if proper steps and grab
handles are not provided, do not climb onto
the area behind the cab.
• Keep steps clean. Clean any fuel, oil, or
grease off the steps before entering the cab
or accessing the deck plate.
NOTE: Any alteration (adding bulkheads, head-
ache racks, tool boxes, etc.) behind the cab that
affects the utilization of grab handles, deck plates,
or frame access steps installed by Peterbilt
should comply with Federal Motor Carrier Safety
Regulation 399.
02611