User's Manual

ManualsBrandsBENDIX ManualsRadar SystemsBENDIX BW2849

Fault Isolation Procedures

1-4

Service Procedure

Fault

Codes

Hand-Held Codes

Description Type of Code Driving TechniqueSID FMI

11, 12 254 4,12 Central Processing Unit Component Key on. If the fault is present, the

system should automatically detect the

problem and set the code. If the fault

is not present at key on, operate the

vehicle and attempt to duplicate the

driving conditions that triggered the

fault code. Possible triggers include

heat and vibration.

13, 34 9 2,4,5,12 Driver Display Unit

(Not applicable for

Freightliner IDI.)

Component Key on. If the fault is present, the

system should automatically detect the

problem and set the code. If the fault

is not present at key on, operate the

vehicle and attempt to duplicate the

driving conditions that triggered the

fault code. Possible triggers include

heat and vibration.

14, 35 1,2 2,12,14 Antenna Component Key on. If the fault is present, the

system should automatically detect the

problem and set the code. If the fault

is not present at key on, operate the

vehicle and attempt to duplicate the

driving conditions that triggered the

fault code. Possible triggers include

heat and vibration.

15 10 2 Right Side Sensor Component Key on. If the fault is present, the

system should automatically detect the

problem and set the code. If the fault

is not present at key on, operate the

vehicle and attempt to duplicate the

driving conditions that triggered the

fault code. Possible triggers include

heat and vibration.

16 11 2 Left Side Sensor Component Key on. If the fault is present, the

system should automatically detect the

problem and set the code. If the fault

is not present at key on, operate the

vehicle and attempt to duplicate the

driving conditions that triggered the

fault code. Possible triggers include

heat and vibration.

Driving Techniques