User's Manual

Part Numbers:
Bendix
®
Data Link Monitoring Unit
™
: K022055
Part Numbers:
Bendix
®
Remote Diagnostic Unit: K101596
9-Pin to 6-Pin Adapter Cable: 801872
9-Pin to 9-Pin Extension Cable: 802229
Part Numbers:
Bendix
®
Trailer Remote Diagnostic Unit: K101597
7-Pin Adapter: 802165
Remote Diagnostic Unit (RDU)
The Bendix
®
RDU simply plugs into the 9-pin
diagnostic connector in the cab of the vehicle.
The green LED will fl ash four (4) times to indicate
that communication has been established. Once
connected, the unit will begin monitoring the
Bendix
®
tractor-based ABS systems. Components
requiring attention will be indicated by illuminated
LEDs.
Trailer Remote Diagnostic Unit (TRDU)
The 7-pin adapter allows the
Bendix
®
TRDU to communicate
through the blue wire of the
trailer electrical connector at
the nose or rear of the trailer,
to the trailer ABS unit.
Data Link Monitoring Unit
™
(DLMU
™
)
The DLMU ris powered when plugged into the
9-pin diagnostic connector. Once communication
has been established, the DLMU will monitor
the various electronic
components – indicating
which are “broadcasting”
by illuminating a series of
red LEDs. Components
monitored include the
engine, brake, IP, cluster
and body controllers.
The DLMU
™
Indicates the Following Component
Component Data Link
Engine Controller J1708 J1939
Transmission Controller J1708 J1939
Brake Controller J1708 J1939
IP Cluster J1708 N/A
Cluster N/A J1939
Body Controller N/A J1939
Top View of the Bendix
®
Data Link Monitoring Unit
™
Similar to the RDU, the Bendix
®
TRDU plugs into the
7-pin connector using an adapter. The green LED will
fl ash four (4) times to indicate that communication
has been established. By connecting through
the blue wire of the trailer electrical connector,
the Bendix TRDU will begin providing immediate
systems status, displaying which ABS component
needs attention using colored LED lights.