User's Manual

7
Trailer Axle Installations
Figures 10 through 13 show typical and alternative brackets for
self adjusting brake adjuster installations on trailer installations.
Universal Anchor Bracket
Tip: The universal anchor bracket mounts to the “S” cam
bushing support bracket. Rockwell, Dana and Fruehauf brakes mount
with two bolts. Position plate on adjuster side of the “S”
cam support. Added bracket thickness requires the use of
longer mounting bolts. Eaton trailer axles manufactured after
January 1993 have the anchor bracket as an integral part of
the "S" Cam shaft bushing support.
Refer to pages 9, 10 and 11 for detailed installation procedures.
Typical Applications
STRAIGHT
ARM
BOLT-ON
BRACKET
AUTOMATIC
SLACK ADJUSTER
Figure 11 Alternative Bracket Types
Figure 12 Universal Anchor BracketFigure 10 12-1/4" Brake Application
AUTOMATIC
SLACK ADJUSTER
STRAIGHT ARM
AUTOMATIC
SLACK ADJUSTER
AX012
ROCKWELL,
DANA AND FRUEHAUF
MOUNTING HOLES
UNIVERSAL
ANCHOR
BRACKET
EATON
MOUNTING HOLE
(PRE-1993)
AX010.AI
SELF ADJUSTING
BRAKE ADJUSTER