User's Manual

21
1
2
2
1
Replacing Slide Pins, Slide
Bushings, & Boots
CAUTION: Do not use gripping tools, as the sealing
surfaces of the slide pins may be
damaged.
8. Remove the four (4) slide bushings (which are of a split
design) using a small screwdriver. Begin at the split.
IMPORTANT: Do not damage the fi tting surfaces.
1 – Carrier 2 – Caliper
1 – Slide bearings (4)
2 – Caliper
1 – Caliper
2 – Bellows (8)
!
5. Clean parts of dirt and dust.
WARNING: Use the specifi ed type of dust removal
equipment to clean–not compressed air. Inhaling dust
particles may be harmful to health.
6. Press the four (4) slide pins out of the caliper.
7. Remove the eight (8) boots by carefully prying them out.
IMPORTANT: Do not damage the fi tting surfaces.
!
1
2
Replacing Slide Pins, Slide
Bushings, & Boots