User's Manual

5
Specifi cations
Tightening Torque Wear Limits
Torque fasteners to specifi cations in table.
Torque Torque
Fastener N•m lbs. ft.
Frame Mounting Screw* 447 to 474 330 to 350
Slide Pin Screw 187 to 200 138 to 148
Retaining Bar Screw 42 to 48 31 to 35
Actuator Mounting Screw 24 to 30 18 to 22
Bridge Mounting Screw 100 +/-10 +50º 74 +/-7 +50º
+/-2º turn +/-2º turn
Air Chamber 176 130
Rotor to Iron Hub 339 to 373 250 to 275
(use Loctite 266)
Rotor to Aluminum Hub 190 +/- 19 140 +/- 14
* Use the Snap-on
™
Torque Wrench Heavy Duty Offset 1
3
/16"
(30mm) Box Adapter (part number XM300B) with the Snap-on
™
400 lbs. ft. Torque Wrench (part number TQR400).
Snap-on
™
Customer Service – 877-740-1900
METRIC STANDARD
Pads, min. lining thickness 3 mm 0.12 in.
Pads, max. uneven wear 1 mm 0.04 in.
Slide pins, max. play 1 mm 0.04 in.
Brake disc, max. wear per 2 mm 0.08 in.
side
Brake disc, max. lateral 0.5 mm 0.02 in.
runout
Brake disc, max. 0.1 mm (DTV) 0.004 in.
thickness variation
Specifi cations