Service manual

Group 59 Anti-Lock Brake System (Bendix) Troubleshooting

Application Cards

Application cards are speciﬁc to the vehicle’s computer

system. Before beginning work on the vehicle, check the

identiﬁcation label on the application card to make sure

you are using the correct vehicle application.

Installing the Application Card:

Slide the application card into the PCMCIA card slot on

the MPC cartridge. The card will seat into the MPC car-

tridge only one way. Do not force the card into place.

Application cards can be inserted or removed while the

Pro-Link is powered. Removal of the application card will

halt the system. Reinserting the application card will re-

boot the ProLink tool.

When correctly seated, the eject button to the left of the

PCMCIA card slot will pop out. If the card seats but the

eject button does not pop out, the card has been

inserted upside down. Pressing the eject button will re-

move only a properly inserted card.

Note: The “Write Protect” (W/P) switch must be in the

OFF position for the application card to work properly.

W3003013